Contact Us

Tel:+86-510-82621388

Fax:+86-510-82603256

E-mail:zhaokunnian@inoco.cn

Add: No.58, Furong Industrial Park, Xishan Economic Technology Development Zone, Wuxi, China

Auto Backwash Water Filter

Auto Backwash Water Filter

1.Auto backwash water filter Introduction Automatic back washing sucking filter provides fully automatic back washing clean operations in industry application, and it can continuously separate impurities from water and other liquid. The maintenance and operation of filter application is very...

Inquiry

  • Product Details

1.Auto backwash water filter Introduction

Automatic back washing sucking filter provides fully automatic back washing clean operations in industry application, and it can continuously separate impurities from water and other liquid. The maintenance and operation of filter application is very simple, even in the severe operation conditions it also can continue to keep running in a good operation.This filter is a kind of filter application which can provide a wide range of comprehensive use of industry, it can guarantee the purity and reliability of filtrated liquid.

image001


2.Technical parameters

INOCO filter code

INOCO-XF-F3/F1

Design standard

GB150 & HG/T21637

Flow rate Range

1-5000 M3/H

Removal rating

25-3000 μm

Pressure range

0-10.0Mpa

Value

motor or pneumatic

Elements material

304;316; Hastelloy

Valve material

CS;304;316;Hastelloy

Seal material

EPDM;BUNA-N; Fluorous Rubber

Model No.

Inlet and Outlet OD

Drain OD

100μm/ flow capacity

Motor Power

XF-F-300

100

40

180

0.37

XF-F-400

150

40

290

0.37

XF-F-500

200

40

420

0.37

XF-F-600

250

50

620

0.55

XF-F-700

300

50

730

0.55

XF-F-700

350

50

1230

0.55

XF-F-800

350

50

940

0.55

XF-F-800

400

80

1400

0.55

XF-F-900

400

80

1600

0.55

XF-F-900

450

80

1900

0.55

XF-F-1000

450

80

2070

0.55


3.Self cleaning filter process

When the differential pressure of inlet and outlet pipeline reaches the presented value, the filter will start the cleaning process. The whole self-cleaning process contains two steps: the drain valve opens; the two stainless steel brushes which is driven by motor inside will brush off impurities which was captured by the mesh and then impurity will be discharged from drain valve.. The whole cleaning process takes about 15 to 60 seconds, while during this time, the filtration system does not stop flowing and controlled by a control box.    

Control type: it has three model of this, time, differential pressure and PLC control.

1

2

3


Hot Tags: auto backwash water filter, China, manufacturers, suppliers, factory, price
  • Feedback